TRAXXAS GEAR 12-T PINION BRASS - 1887 or 38-1887 or TRA1887

This is a 12 tooth 32 pitch pinion gear suitable for use in Traxxas trucks. The pinion gear slides over the end of the motor shaft and is fixed in place with a grub screw. The motor drives the pinion gear and it, in turn, drives the spur gear.

FEATURES:

Machined steel gear

Designed for a 3mm motor shaft

INCLUDES:

1x pinion gear

1x grub screw

SPECS:

Teeth - 12

Teeth pitch - 32

NOTES:

This part requires the use of a 1.5mm hex driver or alan key to install, you should always follow meshing instuctions from your manual when installing a new pinion gear and, as always, when you change the gearing away from stock you need to monitor your electronics temperatures when running.