E-FLITE 30A Pro SB Brushless Coated ESC V2 - EFLA1030BC
E-FLITE 30A Pro SB Brushless Coated ESC V2 - EFLA1030BC
Product Code: EFLA1030BC
Availability:Out of stock
Ask Away, What Can We Help You With??
‘In stock’ items reflect online stock levels only and may differ in store. Please contact us to confirm item availability in store.
E-FLITE 30A Pro SB Brushless Coated ESC V2 - EFLA1030BC
This 30 Amp ESC is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers,saving you weight and complication.
Features
- Up to 30 amps continuous current with proper air flow and 35 amps burst current (15 seconds)
- 3.5A* continuous current, 5V Switch-Mode BEC Circuit
- Stronger BEC for support of most 3-axisstabilization systems
- Drive up to 7 analog or 6 digital standard-size servos with the BEC on Any recommended input voltage
- 3-to 6-cell Li-Po, 9-to 18-cell Ni-MH/Ni-Cd input voltage
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cut off with settings for 3-cell Li-Po (9.2V), 6-cell Li-Po (12V) or 74% of battery starting voltage
- Programmable throttle input range: : 1.1–1.9ms or 1.2–1.8ms
- Programmable soft start for helis and airplanes
- Auto motor shut down if signal is lost or there is interference
- Programmable timing—5 user-selectable ranges to for use with a large variety of brushless motors
- Pre-wired connectors—E-flite EC3™ connector on battery input and 3.5mmgold bullet connectors on motor output leads
- * Proper cooling and airflow required