(03) 9738 0212CONTACT US
0item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

TRAXXAS VXL 3 ELEC SPEED CONTROL - 3355X

Quick Overview

TRAXXAS VXL 3 ELEC SPEED CONTROL - 3355X

$249.95

Availability: In stock

 

Details

The Velineon VXL-3s forward/reverse electronic speed control simplifies brushless technology with easy, built-in profiles and intuitive programming. Tri-mode operation auto detects the motor type for brushed, sensored or sensorless brushless motors. It sets up, operates, and programs just like the Traxxas XL-5 family of ESCs so there's no tricky new procedures to learn.

Traxxas' exclusive Training Mode is also included to limit full throttle to 50% for young or inexperienced drivers. For the most advanced users, the VXL-3s is equipped with two-stage low voltage detection to allow LiPo battery use, including 11.1-volt 3S packs! 

The VXL-3s ESC is equipped with Traxxas high-current connectors for restriction-free current flow.

The ESC is wired with super-flexible, high-current, low-resistance 12-gauge, wire acts like a series of giant pipes, flowing energy in and out of the VXL-3s electronic speed control and into the Velineon 3500 motor. The Traxxas Connector combined with Maxx cable is a better engineered solution for extracting all the power your battery has to give. 

Velineon VXL-3s Waterproof Features

  • The VXL-3s auto-detects the motor type for brushless and sensored brushless motors.
  • Traxxas High-Current Connector eliminates a common bottleneck and maintains pure, unrestricted power flow from the battery to the brushless power system.
  • Built-in two-stage low voltage detection for Lithium Polymer (LiPo) battery use provides a clear signal to the driver that the battery pack is nearing its minimum voltage threshold.
  • Widest range of battery options ranging from 4-cell NiMH or NiCad packs all the way up to 3S LiPo battery packs (11.1 volt)
  • Training Mode is an exclusive Traxxas feature that reduces the overall power output of the VXL-3s by 50%, making it easier for new or younger drivers to control their model. When they're ready, simply change profiles to unleash full-throttle action. 
  • Advanced circuit design allows sensorless brushless motors to operate with the smoothness and precision of the best brushed systems. There's no need for additional sensor wiring and hardware complexity.
  • The EZ-Set push-button setup operates and programs just like other Traxxas speed controls such as the XL-5. This eliminates the need to learn a new set of procedures.
  • The VXL-3s is programmable with three drive profiles:
    • Sport Mode – Fwd / Brake / Rev
    • Race Mode – Fwd / Brake
    • Training Mode** – 50% Fwd / Brake / 50% Rev
  • Multi-color LED provides clear feedback
  • Since the VXL-3s allows experimentation with many kinds of motors, it is equipped with numerous failsafe features to help protect against common mishaps that can cause other systems to fail.
    • Two-stage thermal shutdown protection protects the VXL-3s from overheating.
    • Locked Rotor Protection prevents system damage by cutting power if the vehicle is stuck or the motor is bound.
    • Sensor Phase Detection protects against improperly wiring aftermarket sensored motors.
    • Sensored Motor Backup protection causes the VXL-3s to switch to sensorless operation if a motor sensor fails or sensor wires become disconnected. Sensored motors can be used without connecting the sensor wires to the sensor port on the ESC.
    • Battery Over-Voltage Protection causes the ESC to go into failsafe mode if the maximum input voltage is exceeded.
  • Water resistent case design uses rubber seals and o-rings to protect against damage caused by water and moisture.
  • Micro-fin aluminum heatsink dissipates heat.
  • The built-in auxiliary fan output powers a snap-on accessory fan for increased cooling capacity during extreme use. A handy clasp on the speed control case keeps the wire neatly in place until you are ready to use it.
  • MOSFET design provides high-current output (320 amp peak) with incredibly low resistance (.00075 Ohms).
  • Gold plated 3.5mm bullet connectors on 12-gauge Maxx Cable flow full power to the motor without performance strangling resistance.

 

VXL-3s WATERPROOF ESC SPECIFICATIONS
Input Voltage:   NiCad/NiMH 4-9 Cells (4.8 to 10.8 Volts DC);
LiPo 2-3 Cells (7.4 to 11.1 Volts DC)
Case Size:   39mmW x 55mmD x 33mmH
Weight:   90 grams
Motor Limit (Brushed/Brushless):   No motor limit
On Resistance Forward:   0.00075 Ohms
On Resistance Reverse:   0.00075 Ohms
Peak Current - Forward:   320A
Peak Current - Reverse:   320A
Braking Current:   320A
Continuous Current:   200A
BEC Voltage:   6.0 V
BEC Current:   2.5A (with 6-cell NiMH)
Power Wire:   12-Gauge MaxxCable
Input Harness Wire:   26 Gauge / 100mm
Transistor Type:   MOSFET
Low Voltage Detection:   2-Stage indicators, switchable (on or off)
Thermal Protection:   2-Stage thermal shutdown
Profile selection:   Sport Mode:
    100% FWD, 100% BRAKES, 100% REV
Race Mode:
    100% FWD, 100% BRAKES, NO REV
Training Mode:**
    50% FWD, 100% BRAKES, 50% REV
Single-Button Setup:   Yes, Traxxas EZ-Set
Battery Input Connector :   Traxxas High-Current Connector
Motor Types (Autodetect):   Brushed, brushless, sensored brushless
Ports:   RX Input, motor sensor, auxiliary fan

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.