TRAXXAS GEAR 23T PINION/SCREW - 2423
TRAXXAS 23T 48P PINION GEAR - 2423
Availability: Out of stock
TRAXXAS 23T 48P PINION GEAR - 2423 or 38-2423 or TRA2423
This is a 23 tooth 48 pitch pinion gear suitable for use in Traxxas trucks. The pinion gear slides over the end of the motor shaft and is fixed in place with a grub screw. The motor drives the pinion gear and it, in turn, drives the spur gear.
pinion gear with set screw
Silver in colour
Designed for a 3mm motor shaft
1x pinion gear
1x grub screw
Teeth - 23
Teeth pitch - 48
This part requires the use of a 1.5mm hex driver or alan key to install, you should always follow meshing instuctions from your manual when installing a new pinion gear and, as always, when you change the gearing away from stock you need to monitor your electronics temperatures when running.