TRAXXAS Air Filter Assembly w/ Single Stage Foam - 4060

Product Code: TRA-4060

Availability:In stock

‘In stock’ items reflect online stock levels only and may differ in store. Please contact us to confirm item availability in store.

TRAXXAS Air Filter Assembly w/ Single Stage Foam - 4060

This is complete air filter assembly as used on the Nitro Stampede and the Nitro Sport. The air filter assembly is installed over the carby air intake and prevents dirt and debris from entering the carby on your nitro engine. Air filter sponge should be very slightly oily (not dripping) to trap very fine dirt and dust and stop it fouling the carby.

Diameter of housing at carby opening - 8mm

Suitable for use on .15cc and .12cc engines.

NOTES:

Because this is a single stage air filter assembly it should be cleaned and re-oiled very frequently to prevent over fouling of the sponge mesh and restricting air flow thereby requiring frequent re-tuning of your engine. Worst case scenario is the sponge being so dirty as to suck dirt into the carby and thereby the engine which will damage the piston and sleeve and affect compression.

TRAXXAS Air Filter Assembly w/ Single Stage Foam - 4060